Bricked Your Atrix HD While Changing Roms. in case you are bricked your Atrix HD Then follow the instructions Below to Make your Atrix HD Working again.
Requirements
1)RSDLITE Latest Version
2)ATRIX HD
3)USB DRIVERS
4)Little Of Patience
Download The SBF From HERE
You need Motorola Drivers for your PC to recognize your cell phone, download and install it for windows 32bit / 64 bit OS.
Download and install up to date RDSLite software, the latest version is v5.7 catch it here.
Grab and save the sbf/xml/zip file to your PC, make sure the file was made for your device.
Charge your battery and pick USB data cable.
Run RSD Lite on your computer, press the ‘…’ button then find and choose the file you have saved in third step, if you download a compressed file you will notice the ‘Unzipping’ window appears, choose ‘Uncompress Only’ button. You’ll see the file information in the ‘File Properties’, make sure your phone model match with your device.
Requirements
1)RSDLITE Latest Version
2)ATRIX HD
3)USB DRIVERS
4)Little Of Patience
Download The SBF From HERE
You need Motorola Drivers for your PC to recognize your cell phone, download and install it for windows 32bit / 64 bit OS.
Download and install up to date RDSLite software, the latest version is v5.7 catch it here.
Grab and save the sbf/xml/zip file to your PC, make sure the file was made for your device.
Charge your battery and pick USB data cable.
Run RSD Lite on your computer, press the ‘…’ button then find and choose the file you have saved in third step, if you download a compressed file you will notice the ‘Unzipping’ window appears, choose ‘Uncompress Only’ button. You’ll see the file information in the ‘File Properties’, make sure your phone model match with your device.
- Take your phone and enter fastboot mode by turn off your device first, then press and hold down three buttons at the same time: volume up + volume down + power button, after which the phone will be turn on to the “Boot Mode Selection Menu’.
- Connect the USB cable to the phone and press volume down to scroll down to ‘AP Fastboot’ and press the volume up to select it, and you’ll switch to ‘AP FastBoot Flash Mode (S)’, at the bottom of the screen make sure ‘Transfer Mode:’ is ‘USB Connected’.
- Back to RSD Lite, then click the ‘Start’ to start the flashing process, see the flashing process and wait for about 12-20 minutes. After the completion, status on the RSD Lite flash will ‘reboot’ and your phone will reboot automatically and updating the files.
- Done. If the whole process goes well, your phone will boot normally.
Warning:Im not responsible For Bricking your Atrix HD
0 comments:
Post a Comment